WLD2 is a WiFi / Ethernet water leak detector with support for WWW, SNMP, e-mails and PoE. It uses up to  4 very sensitive sensing cables. Alarms are triggered by even the smallest volumes of liquids, such as condensation from A/C pipes or water leaks in general.  You will receive alarms before costly damages occur.  In addition to flooding, the device also detects disconnected or damaged sensing cables for increased reliability. Thanks to WiFi connectivity,  the WLD2  water leak detector can be installed in remote places.  In case of flooding, it can send an alert via e-mail, SNMP trap, or the SensDesk cloud. With an external SMS gateway by HW group, it can send a text message or dial a phone number.  Of course, in critical applications, it can also communicate via wired Ethernet and  can be powered with PoE. WLD2 supports zone creation. The flood sensor can call a different phone number for each zone. WLD2 can be connected to the  SensDesk portal  using the  HWg-Push protocol,  as well as to standard monitoring systems thanks to  SNMP  and  SNMP Trap  support. Flooding can be also indicated by switching a remote output (e.g. a relay) over the network (Box-2-Box mode with a Poseidon2 or Damocles2 unit), independently for each sensing cable. Compared to HWg-WLD,  up to 4 independent detecting cables can be connected to the WLD2 to help locate the leak more accurately.