Features
The ITalks MCS 1608 Full LoRa end node is intended to start up quickly with (Private) LoRa applications. This complete LoRa node already has countless sensors, so that it can be quickly deployed for a test with the Internet of Things application you want. Based on the tests, the optimal sensor for your application can then be selected. It has an IP67 housing, so that it can also be used outdoors.
The nodes can be programmed by us at cost.
Do you want to get started?
- with the MCS 1608 programming cable you can configure the units yourself
- with the ITalks ED1000 OTA unit you can configure the units and perform firmware updates.
ITALKS MCS 1608 FULL LORA SENSOR - LORA ALLIANCE CERTIFIED
These ITalks sensors are LoRa Alliance certified and therefore suitable for both private and public networks.THE CONVENIENCE OF A STARTER KIT WITH THE ITALKS MCS 1608 FULL LORA
You may not only want a LoRa sensor, but a total solution. A starter kit makes it extra easy. A starter kit includes:- the right hardware
- 1 year LoRa connectivity
- ITalks IoT Suite with which you organize all integrations and visualizations of the data
HIGHLIGHTS
- IP67 housing
- LoRaWan protocol - LoRa Alliance certified
- GPS
- Temperature
- Humidity
- Barometer
- Accelerometer
- Magnetometer
- io
- 1-Wire
- external antenna for optimal range in specific situations
- magnets on the housing
- smaller housing
APPLICATIONS
- multi purpose LoRa sensor can be used for almost all IoT applications
- Running hours, distance traveled, average / min / max in your daily report The ITalks MCS 1608 can send a daily report showing the counters of running hours and distance traveled. This also includes minimum, maximum and average values of temperature, air humidity and air pressure. Ideal if you send maintenance based on operating hours.
- Predictive maintenance based on vibration patterns of the machine The ITalks MCS1608 measures the frequency and the amplitude of the three strongest vibrations. On the server side you can use this as input for machine learning, so deviating behavior can be a trigger for maintenance.
- Indoor position determination based on beacon functionality The latest firmware gives the possibility to use an ITalks MCS1608 as beacon. Other ITalks MCS1608s then know which beacon they are closest to based on signal strength. Interesting to see in which warehouse certain assets are stored for example!
- Warning / alarm when opening door / gate An alarm can be triggered with a door contact on the ITalks MCS1608. Useful if, for example, you want to trace containers and want to know if the door is being opened.
